YouTube, Video making and editing, etc. coupled to excelfox ( windows Movie Maker )

[DocAElstein]

Viewing cameras on Computer ( for first time )

The viewing on a computer via Guarding Vision Software, of a camera , or cameras, which are connected to the DVR can be done at any subsequent time via the uppermost small View tab,
https://i.postimg.cc/SK2nSyVY/View-M...-first-use.jpg

View

_#_Main View______

,( but note that after the first time of taking this action , an extra larger Main View main tab will appear and from then on it is always there , https://i.postimg.cc/rp5GgCWp/New-Ma...se-of-View.jpg )

_#_Main View_

The + and - ,
https://i.postimg.cc/2jGwPwtb/Main-View-Showing.jpg https://i.postimg.cc/HsPtLLdT/Main-View-Showing.jpg
,are an indication of an added device.

( If we were to Delete this device, https://i.postimg.cc/8cZmMpvB/Delete-device.jpg , the entry remains when Viewing , but we lose the camera view and the drop down list resulting in no indicated + or - , https://i.postimg.cc/sxyx45z5/No-vie...t-No-shown.jpg

If , after Deleteing a device, we re add it using the same Nickname then we will not get a duplicate entry in any View window: In general any Nickname appearing will remain there, and having or not having the + or - is the indication of whether that named device is actually available/ has been Added



The Software will in general always be cycling through to keep the camera views updated / refreshed. This process can often get stuck, or it may be slowly checking through all camera ports on the DVR, even those to which no camera is connected . To “wake up” the system we have the possibility to refresh/ restart a camera group, https://i.postimg.cc/pLhJ5tLz/Main-V...ossibility.jpg ,or alternatively a double click on a camera from the groups drop down list, https://i.postimg.cc/fLYkdBGw/double...to-wake-up.jpg , will also act to “wake up” / re start the viewing using that particular camera, https://i.postimg.cc/mrvth06X/double...wake-it-up.jpg

[DocAElstein]

Viewing cameras on Computer ( for first time )

The viewing on a computer via Guarding Vision Software, of a camera , or cameras, which are connected to the DVR can be done at any subsequent time via the uppermost small View tab,
https://i.postimg.cc/SK2nSyVY/View-M...-first-use.jpg

View

_#_Main View______

,( but note that after the first time of taking this action , an extra larger Main View main tab will appear and from then on it is always there , https://i.postimg.cc/rp5GgCWp/New-Ma...se-of-View.jpg )

_#_Main View_

The + and - ,
https://i.postimg.cc/2jGwPwtb/Main-View-Showing.jpg https://i.postimg.cc/HsPtLLdT/Main-View-Showing.jpg
,are an indication of an added device.

( If we were to Delete this device, https://i.postimg.cc/8cZmMpvB/Delete-device.jpg , the entry remains when Viewing , but we lose the camera view and the drop down list resulting in no indicated + or - , https://i.postimg.cc/sxyx45z5/No-vie...t-No-shown.jpg

If , after Deleteing a device, we re add it using the same Nickname then we will not get a duplicate entry in any View window: In general any Nickname appearing will remain there, and having or not having the + or - is the indication of whether that named device is actually available/ has been Added



The Software will in general always be cycling through to keep the camera views updated / refreshed. This process can often get stuck, or it may be slowly checking through all camera ports on the DVR, even those to which no camera is connected . To “wake up” the system we have the possibility to refresh/ restart a camera group, https://i.postimg.cc/pLhJ5tLz/Main-V...ossibility.jpg ,or alternatively a double click on a camera from the groups drop down list, https://i.postimg.cc/fLYkdBGw/double...to-wake-up.jpg , will also act to “wake up” / re start the viewing using that particular camera, https://i.postimg.cc/mrvth06X/double...wake-it-up.jpg

[DocAElstein]

_________

[DocAElstein]

_________

[DocAElstein]

_________________

[DocAElstein]

_________________

[DocAElstein]

Page 3 https://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software?p=15910&viewfull=1#post15910 https://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software?p=15910&viewfull=1#post15910
https://excelfox.com/forum/showthrea...ll=1#post15910 https://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software?p=15910&viewfull=1#post15910

https://excelfox.com/forum/showthrea...5910#post15910 https://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software?p=15910#post15910

---

Step 2b: P2P Access
2b) Remote ( Cloud P2P ) Access of DVR over the internet with a PC using Guarding Vision Windows PC Client Software

Step 2b: P2P Access

Remote ( Cloud P2P ) Access of DVR over the internet with a PC using Guarding Vision Windows PC Client Software

Most published instructions for Remote ( Cloud P2P ) Access of the Sannce DVR over the internet with a PC using Guarding Vision Windows PC Client Software are incomplete or incorrect. ( Example the section from Step 2b: P2P Access at the following Sannce article is wrong and incomplete, https://support.sannce.com/hc/en-us/...arding-Vision-
Similarly the Sannce article here , https://help.annke.com/hc/en-us/articles/4405215514905 , is incorrect

---

2b)

Remote ( Cloud P2P ) Access of DVR over the internet with a PC using Guarding Vision Windows PC Client Software,
2b) -A- ______ Following on from previously obtaining LAN local access, and
Adding ( making available ) DVR for remote Cloud use for the first time: DVR is not yet Registered for P2P remote Access

https://excelfox.com/forum/showthrea...ll=1#post15912

2b) -B- Cloud P2P remote access if you know the password and username of Sannce registered account holding DVR P2P relevant information

https://excelfox.com/forum/showthrea...ll=1#post15918

2b) -C- Cloud P2P remote access if no Sannce registered account holds DVR information
Possible Problem! Need to remove details of DVR from Sannce registered devices

https://excelfox.com/forum/showthrea...ll=1#post15919

[DocAElstein]

Page 3 https://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software?p=15910&viewfull=1#post15910 https://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software?p=15910&viewfull=1#post15910
https://excelfox.com/forum/showthrea...ll=1#post15910 https://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software?p=15910&viewfull=1#post15910

https://excelfox.com/forum/showthrea...5910#post15910 https://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software?p=15910#post15910

---

Step 2b: P2P Access
2b) Remote ( Cloud P2P ) Access of DVR over the internet with a PC using Guarding Vision Windows PC Client Software

Step 2b: P2P Access

Remote ( Cloud P2P ) Access of DVR over the internet with a PC using Guarding Vision Windows PC Client Software

Most published instructions for Remote ( Cloud P2P ) Access of the Sannce DVR over the internet with a PC using Guarding Vision Windows PC Client Software are incomplete or incorrect. ( Example the section from Step 2b: P2P Access at the following Sannce article is wrong and incomplete, https://support.sannce.com/hc/en-us/...arding-Vision-
Similarly the Sannce article here , https://help.annke.com/hc/en-us/articles/4405215514905 , is incorrect

---

2b)

Remote ( Cloud P2P ) Access of DVR over the internet with a PC using Guarding Vision Windows PC Client Software,
2b) -A- ______ Following on from previously obtaining LAN local access, and
Adding ( making available ) DVR for remote Cloud use for the first time: DVR is not yet Registered for P2P remote Access

https://excelfox.com/forum/showthrea...ll=1#post15912

2b) -B- Cloud P2P remote access if you know the password and username of Sannce registered account holding DVR P2P relevant information

https://excelfox.com/forum/showthrea...ll=1#post15918

2b) -C- Cloud P2P remote access if no Sannce registered account holds DVR information
Possible Problem! Need to remove details of DVR from Sannce registered devices

https://excelfox.com/forum/showthrea...ll=1#post15919

[DocAElstein]

https://excelfox.com/forum/showthrea...6060#post16060

---

Advise of preparations for encountering 4th username/ password pair for the first time,
( the Sannce P2P account Registering process )

Sannce organise something like a central register/ data storage facility, making it possible for various technical details required for remote P2P type internet usage of you DVR to be stored and accessed. P2P technology: https://en.wikipedia.org/wiki/Peer-to-peer
https://en.wikipedia.org/wiki/Peer-to-peer_file_sharing
https://en.wikipedia.org/wiki/Anonymous_P2P
The Sannce DVR model in use with the Guarding Vision Software on a PC, insists that you use such an account if you wish to use the P2P remote access possibility with your DVR to get access to your DVR over the internet ( from anywhere in the world ) using the world wide web internet.
You necessarily need to register such an account, and typically you will be asked to register such an account when using the Guarding Vision Software on your computer.
It’s free and there is no limit to how many account you can have. But the registering is full of problems and bugs. Many of these problems and bugs seem to get worse if you do not do the registering quickly. Hence one of the main reasons for this post is to prepare all you need before hand so as to improve your chances of a successful registration.

If for any reason your registration fails , you will most likely not be able to use the username and Email address that you tried to Register with ever again in a Sannce P2P Registration. Therefore I recommend preparing at least two full sets of the three things you need. Put them in a text file or in some other place where you can get at them easily and quickly when you are using your computer for the registration. These three things are
[color=black]_Username
_Password
_ Email address[/color]
For reasons of which I do not yet fully understand, some character combinations and Email addresses work better than others.
I would recommend therefore using similar ones to the example that I give.
I would further recommend using gmail Email address.
I would recommend keeping the gmail username as short as possible. I would recommend making at least 2 spare new gmail accounts initially.
I would recommend using a Username and gmail username that is not important to you, at least in your first attempts. - The main reason why I recommend this is that if for any reason your registration fails , which it often does, then you will most likely not be able to use the username and Email address that you tried to Register with ever again in a Sannce P2P Registration. Possibly later, once you are more comfortable and have possibly mastered the registering successfully, you could then risk using a preferred Username and gmail address.

I would recommend you register beforehand at least 2 gmail Email accounts ( https://accounts.google.com/signup/v...owEntry=SignUp ) , and then prepare a text file , .txt , or Word file , .doc , looking something like the following example. In this following example I have two complete lists of the info needed to register , and in addition I have also included the 2nd username and password pair. There are no great problems associated with using this other pair, but as they are often needed shortly after registering, it is convenient to have them at hand along with the other information

Register Account  ( Annke Sannce Registered Vision Guarding Vision Cloud P2P App  Sannce Home  Account User Name and Password by Email Address )
User Name                                       cloudplop
Password                                          SangyP2P.!*  
Confirm Password                                      SangyP2P.!*
Email Address                                          poo2peey@gmail.com 

Register Account         ( Annke Sannce Registered Vision Guarding Vision Cloud P2P App  Sannce Home   Account User Name and Password by Email Address  )
User Name                                       cloudpooh
Password                                          SangyP2P.!*  
Confirm Password                                       SangyP2P.!*
Email Address                                           plop2pee@gmail.com 


Remote Enabled DVR serial No.Sannce Home Verification Code2
Username DVR SN.                                                   F12345678
Enabled Password verification code           Sanky2

So when prompted to register, this would be the relevant things to write in or paste in
cloudplop
SangyP2P.!*
SangyP2P.!*
poo2peey@gmail.com

If anything went wring, then I would not attempt to use the Username or Email address again , ( there is no problem in trying the password again ) , so I would start again with this
cloudpooh
SangyP2P.!*
SangyP2P.!*
plop2pee@gmail.com

Here are three screenshots of the typical Registration process: Initially a window indicates the 4 main full width fields that need to be filled in , the username, the password ( twice ) and an Email address. After filling in all 4 fields, you should click on Send Message. This should send an Email to the Email address containing a number. That number should be entered in the bottom left half width field, and then finally you click on Register https://i.postimg.cc/15QXxWV4/3-pics...ter-window.jpg
Attachment 3780

Often after registering, I would be doing something requiring me to do a so called “ + Adding” of a device ( usually the device would be my DVR ). I would then be asked to fill in one or more of two fields ( in some situations the first field would be already filled in )
The information I would then need to give would either be the second or both of these
F12345678
Sanky2

---

Some typical problems
In the next screenshot, the all the usernames and Email addresses are known to have never resulted in a successful Register of an account. Originally they ere accepted but the final registration failed, for example due to the not being able to be completed within a certain time. So no registered account uses any of the usernames and Email addresses.
Despite trying different computers, Browsers, waiting several days, deleting cookies , Browser history, etc, attempting to use the usernames and Email addresses always resulted in rejection
https://i.postimg.cc/rydPvrDP/Userna...ng-account.jpg



The next screenshot shows that the length of an accepted Email address is limited. A valid gmail Email address was pasted in , but the field only took a limited number of characters, which did not include those containing the email provider, and hence an invalid Email address was indicated
https://i.postimg.cc/Fz35mdH3/Does-n...EMail-name.jpg


The next screenshot is an example of the software not recognising some Email providers: I have tried many different names, that is to say, many different valid Email addresses using the provider t-online.de ( German Telekom ) , but they are never accepted as valid Email addresses.
https://i.postimg.cc/y8wm3D1k/Does-n...-online-de.jpg

[DocAElstein]

___________________________________