Cloud P2P remote access if no Sannce registered account holds DVR information.
Prepare Sannce account registering details.
As discussed in detail here, https://excelfox.com/forum/showthrea...ll=1#post15911 , it is wise to have prepared before hand all the details for Sannce P2P account registration.
For the purposes of this demonstration I have prepared a username and password to use, as well as registering a new gmail Email account.
User Name cloudpooh
Password CloudP2P.!*
Confirm Password CloudP2P.!*
Email Address poohessin@gmail.com
I have this information stored at a convenient place so that I can access it quickly when needed, for example in a text file, https://i.postimg.cc/90H2s4Kq/Annke-...-text-file.jpg
Also in this way, -C- , we also need the username/password information which we discussed as coming from the actual DVR serial number, and a Verification Code set via the monitor and mouse in order to “Enable” the DVR for such internet things. These are the values used throughout my previous posts,
F53992124
Sannce2
I keep this data also convenient to hand during the following work, https://i.postimg.cc/xdRzP4jW/Serial...-test-file.jpg
Any previous version of the Guarding Vision software I have de installed for the purposes of the following demonstration and explanations
I downloaded and made a fresh install of the Guarding Vision Software.
( full details: .exe installation File: https://excelfox.com/forum/showthrea...ll=1#post15901 ;
Installation: https://excelfox.com/forum/showthrea...ll=1#post15902
First use : https://excelfox.com/forum/showthrea...ll=1#post15901 )
After the successful installation a Guarding Vision desktop icon appeared on my computer’s desktop.
I double click on the Guarding Vision desktop icon , and as expected, I am asked on the first opening to give a “Super User” username and a password. This password is only required for further running/ opening of the Guarding Vision, and can be anything, but for the sake of simplicity I will use the same as in all previous working examples
DocAElstein
Gaudy.!*
After logging in , ( and cancelling any offered help window) , I am left with the basic Guarding Vision PC Client Software user interface.
By default, Device Management is showing a single simple ( local ) Device, - that showing with background highlighted in brown https://i.postimg.cc/0NH658DZ/Device-for-managemant.jpg
https://i.postimg.cc/qv94b9Gz/LTE-Ser-Sszu-D-1-snip.jpg
https://i.postimg.cc/cLKdcswp/LTE-Ser-Sszu-D-1.jpg
| _#_Control Panel______Device Management_ |
_Device Type______________
|
_ _#_Upgrade Server _____
|
__+_Add New Device Type ___
|
On opening the Gaurding Vision Software for the first time, this ( local LAN Type ) # Device is typically the only default + Added device. The software and technology behind this is for simple local connection. This device is no use to us, because our DVR is not connected locally – it’s not connected to the same router or modem to which our computer is: I am away from home at a remote location, which might be anywhere in the world. My DVR is still at home, and is connected to my home router/modem via a LAN RJ45 Ethernet cable.
We need a type that has the ability to do the P2P remote stuff, since we need this P2P technology to get access to our DVR across the internet ( https://www.encyclopedia.com/economi...technology-p2p )
Note also that no online device is showing: The Online Device window is designed to search for ,and show, any locally connected devices such as DVRs which we can then use via a simple local connection
So we need to add a new device type: https://i.postimg.cc/L4yydWyT/Add-New-Device.jpg
We need and so check the Cloud P2P Device , https://i.postimg.cc/PJq2pbqY/Add-New-Device.jpg
After doing this the new Device type appears available to us in Device type window, https://i.postimg.cc/jdmZ27Yn/new-de...ype-window.jpg , but it is not selected – ( so we are still managing the simple device type , and so the large window remains empty , https://i.postimg.cc/4yKpRWdL/Still-...-have-none.jpg )
So we select the newly added Cloud P2P Device type, https://i.postimg.cc/6q1zd77S/select...evice-type.jpg .
The act of selecting / clicking the Cloud P2P Device button in the device type window is to evoke a large Sannce cloud login window, and the first thing we must do is select the land associated with our DVR, - in my case Germany , https://i.postimg.cc/MKv9zYN8/Select...fore-login.jpg , then login , https://i.postimg.cc/GpkMZhN8/login-...ct-country.jpg .
Hitting login evokes the Sannce Login / Register window, https://i.postimg.cc/Zqk77yfz/Sannce...ter-window.jpg .
In this post, we need to register an account for the first time, so are initially only interested in the lower half of that Sannce Login / Register window, https://i.postimg.cc/Bbt73Fwn/Lower-...ng-account.jpg
So we hit Register, https://i.postimg.cc/85pny9RW/Regist...ng-account.jpg ,
At this point we should prepare to try and do the registering quickly to improve the chances of success. We should get out details handy to copy from, and it is also a good idea to get Email account that you use open and ready to receive a security verification code that will be sent as part of the registering process.
So we fill in quickly and hit the Send button, https://i.postimg.cc/ydh3Nptf/Add-re...age-button.jpg , which should send a security verification code to the given Email address.
Typically the code arrives very quickly at an Email address, and so be prepared for a message of some form in your in box https://i.postimg.cc/SRWB3CXY/code-a...il-address.jpg https://i.postimg.cc/h4TRXWC4/code-a...il-address.jpg https://i.postimg.cc/zXNZWtMC/code-a...il-address.jpg
The code should be typed in quickly and then hit the Register button quickly https://i.postimg.cc/nzfQpfRj/Wnter-...er-quickly.jpg
A window should appear for a split second saying something like Registration Complete , after which you are returned to the Login/ Registration window, from which you can now use the new account to log in. We are only interested now in the top half of the login/ Register window and we ignore the Register button. We simply fill in our newly made account username and password, and hit the Login button , https://postimg.cc/gallery/JDLXJFT .
Because we have no information in this new account we will be told that there is no resource to be imported in a small black window bottom right, https://i.postimg.cc/Yq7jZ6np/logged...e-imported.jpg .
Because we have no Online Device showing in the Online Device Window, https://i.postimg.cc/85bgcLHd/No-Online-device.jpg , we are restricted to using the + Add Device in the large Device Management Window, https://i.postimg.cc/QtcxbBqV/Restri...ent-window.jpg
You then need to add in the two Fields,
https://i.postimg.cc/ry37wgXk/Fill-i...ation-Code.jpg https://i.postimg.cc/xdRzP4jW/Serial...-test-file.jpg
, and then hit OK, https://i.postimg.cc/c432gY08/Fill-i...de-then-OK.jpg
Some processing may take a few seconds, https://i.postimg.cc/Rhk1xNDk/Proces...ke-a-while.jpg , since its calling up information held somewhere by Sannce.
Usually this will then work as intended, and our device appears, https://i.postimg.cc/NG5WtSnD/Succes...ce-appears.jpg .
It appears to have been a success, but if we go now in to the Main Viewing we don’t seem to see any picture, and note also that although we do see the new Folder for the account cloudpoohpee , there is no + alongside it, so there are no resources, that is to say, no items in any drop down list. This ties up with the previous small black window bottom , https://i.postimg.cc/Yq7jZ6np/logged...e-imported.jpg , which popped up during the very first successful ,.og in with theis account.
But we have done correctly and fully and successfully all we can and all we need to do get the remote cloud P2P way working, So what’s the problem……....._
See next post....
Reply With Quote
Bookmarks