Register Sannce P2P Account
First Registration of an account for the.. …. Annke Sannce Registered Vision Guarding Vision Cloud P2P App Account User Name and Password by Email Address ….
So, If we now click on/ select the new Cloud P2P Device Type , we will initially see a large Login window pop up
https://i.postimg.cc/ryr9x1jd/select...ill-appear.jpg https://i.postimg.cc/KvF8F0Sb/mcecli...in-country.png
You should select a country, and remember it. It is probably best to always use your country, where the DVR is located. https://i.postimg.cc/SsXfZCpv/select...then-login.jpg ( More on that later ).
Register ( a Annke Sannce Registered Vision Guarding Vision Cloud P2P App Account User Name and Password by Email Address )
Because we are doing this for the first time, and assuming we are new to anything to do with Sannce, we will need at this point not to log in yet, but instead, to register an account as discussed in the last post
Note once again also that we assume that
either
_no other account has made available to Cloud P2P access our DVR
Or
_ if our DVR has been in the past made available to Cloud P2P access using an account, then that account has then at some later date logged in and removed (Deleted) the account so that it is not available at the time that we will make it available.
If our DVR has been in the past made available to Cloud P2P access using an account but has not been removed from availability (Deleted) , this fact will not prevent us registering an account, but it will prevent us using the account ( or any other account ) to make our DVR available to us using Cloud P2P access.
Register and then log in
Having entered the large window , https://i.postimg.cc/KvF8F0Sb/mcecli...in-country.png , select the region where the DVR is
https://i.postimg.cc/SsXfZCpv/select...then-login.jpg
Because this is the first time we are trying to doing anything related to P2P accounts, it is unlikely that we have ever registered an account of the type required, so we ignore the upper logging in part and concentrate on the lower half
https://i.postimg.cc/2StxPbqs/Regist...ount-thing.jpg
https://i.postimg.cc/rmkS57Ym/Lower-...-and-Passw.jpg
You need to add details quickly,
https://i.postimg.cc/8zcHKBCd/Regist...ount-thing.jpg
, and then click on Send Message
https://i.postimg.cc/MZcZJt6P/Send-M...gistration.jpg
Usually a number code arrives fairly quickly, at the given Email address https://i.postimg.cc/6pBNqhKN/Verifi...com-In-Box.jpg
https://i.postimg.cc/BQT0JVdg/Verifi...com-In-Box.jpg
https://i.postimg.cc/bNcPchFr/Verifi...com-In-Box.jpg
, and this in turn should be quickly typed in, https://i.postimg.cc/902LbJJm/Type-r...in-quickly.jpg , and finally click the Register
https://i.postimg.cc/W4KKGGBz/All-de...o-Register.jpg
Assuming the registration has gone OK, you can now use the upper part of the login/register window to log in
https://i.postimg.cc/6p8fdktV/Login-after-Register.jpg
https://i.postimg.cc/TPmjsnyp/Login-...upper-half.jpg
You will probably get a warning that you have no resources to import.
https://i.postimg.cc/FR3GbrH2/Loging...-to-import.jpg
That is as expected at this stage. It is because the account has not made any CloudP2P availability yet. – In simple terms, you have done nothing yet with this account, so there is nothing of significance that needs to be done when you log in. ( - We will see later, that it is the act of logging in that, as a by product, makes a connection ( “imports resources to/ for ” ) availability/ possibility into the computer to/ of access via P2P internet remote. What resources/ possibilities your lodging in makes available will depend on what you have previously done using this account, that is to say, depending on what you have done when logged in with this account
The technical processes are not clear of what actually is happening, hence the rather unclear use of wording by me here.
Using Registered account to set up P2P connection
Being logged in with a valid account basically makes it possible to make available to the internet the P2P remote access of a DVR. (Once this has been done with a particular account, then no other account may do the same, until that particular account is used to remove that availability . But you can, on any other computer , on any other running application of the Guarding Vision software , log in with that same particular account ( if you know the user name and password) , and this logging in will automatically make the same availability to you on that other computer where you log in)
As a result of logging in, the Cloud P2P Device _ Type is highlighted, or rather it still is highlighted , since it was highlighted for a split second, as you clicked it/ selected it, ( but which caused the login/ register windows to pop up)
https://i.postimg.cc/cJLmnPkZ/After-...ud-devices.jpg
________Device Managemant
|
_#_ Cloud P2P Device ____
|
Because the Cloud P2P Device _ Type is highlighted, we are effectively managing CloudP2P type devices, but nothing is showing yet, as we have done nothing yet.
Also in the Main View, whilst you will see a folder appearing for any account that is , ( or has been at any time ) , logged in , as well as any other devices,
https://i.postimg.cc/dVp7qqtZ/Folders-no-or.jpg
https://i.postimg.cc/43cYyrmL/Folders-no-or.jpg
you will not see any + or – showing to the left of it. – There are no “resources” , that is to say, no cameras in it, nothing to see in it.
Just to clarify: In that last screenshot, we see an entry for the previously added local LAN availability , which we had given the “Nickname” DVR_LAN_BN81BL_F53992124 and we also have a + in order to open that folder to reveal the camera “resources”
We also see both the currently logged in account which we just made, cloudp2pee, and an account that is not logged in which I had logged in with some time previously, cloudygirlp2pssd
Neither of the two Cloud P2P accounts have any Added / made available devices: For our new account, cloudp2pee we have done nothing with it yet, ( and with cloudygirlp2pssd , I had added resources, but then deleted them.
( Having or not having the availability in the Guarding Vision software, that is to say having a devices detail added or not, will determine whether or not the folder has a + or – showing to the left of it. But that does not guarantee that we get pictures displayed. That will depend on whether the DVR has a working connection to
_ the same router/ modem as that which is connected to our computer, for the local LAN devices
or
_ a reliable internet connection of some form, for the Cloud P2P devices. ( In this latter case it does not need to be, but can be, a connection via the same router/ modem as that which is connected to our computer )
So at this stage we don’t see anything yet,…_
https://i.postimg.cc/7Lxqyjsm/Not-ye...ng-by-P2-P.jpg https://i.postimg.cc/fynhbFW3/Not-ye...ng-by-P2-P.jpg
Not yet seeing anything by P2P.JPG
_... But we are ready now to look at the 3 ways to get the P2P access working to give us pictures
Reply With Quote
Bookmarks