Page 4 https://excelfox.com/forum/showthrea...Software/page4 https://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software/page4
Post # 31 https://excelfox.com/forum/showthrea...ll=1#post15917 https://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software?p=15917&viewfull=1#post15917
[Righthttps://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software?p=15917#post15917] https://excelfox.com/forum/showthread.php/2769-P2P-Cloud-DVR-remote-Access-via-a-(remote)-PC-Using-Guarding-Vision-PC-Client-Software?p=15917#post15917 [/Right]
-AB- Notes in preparation for full remote Cloud P2P DVR access , Installing, Setting up and using at remote location. ( No direct Access to DVR )
These two different scenarios correspond to the two next posts,
-B- Cloud P2P remote access if you know the password and username of Sannce registered account holding DVR P2P relevant information
https://excelfox.com/forum/showthrea...ll=1#post15902
-C- Cloud P2P remote access if no Sannce registered account holds DVR information
https://excelfox.com/forum/showthrea...ll=1#post15919
_.______________________
Obtaining remote access to DVR over the world wide web internet
Whilst it is possible to obtain over the internet access to a DVR at a remote location after installing the Guarding Vision Software for the first time, certain things will have needed to have been done previously and certain things will need to be known.
These things will not always be explained in full detail in this and following posts. They are described in detail in the previous posts, and it is advisable to read through those previous posts in order to get a full picture and understanding of the basic use of the Sannce DVR with Guarding Vision PC client software.
The DVR must be connected to the internet, - it must be “OnLine”
This is required for both -B- and -C-
DVR Enabled and password ( Verification code ) and username ( Serial No. , SN)
Initially in the first DVR set up using a mouse and monitor, or at a later date via the settings using the mouse and monitor, in the Network settings a box labelled Enable must be checked, and underneath this is a Verification Code needs to have been set.
In addition for -C- you must know this Verification Code
https://i.postimg.cc/yNN0d4bG/Enable...ation-Code.jpg
For -C-, you also need to know the 9 character serial number which is typically on a label or sticker on the underside of the DVR. Typically the first character is an upper case letter, and the other 8 characters are numbers.
The serial number and the verification code are those which I have referred to throughout my previous post explanations as a second required username and password pair. In some literature these two things are simply referred to by the serial number and verification code, or Sannce Home verification code.
These two things need to be known as they will need to be filled in at a certain stage in a window that pops up when performing a so called Adding action: https://i.postimg.cc/9z3wqWPW/Second...sword-pair.jpg
In all the working examples I have discussed so far, I used the following pair. ( The password/ verification code I chose and set myself , but the serial number I cannot chose – I noted it from the underside of the DVR that I have been using )
F53992124
Sannce2
( https://i.postimg.cc/B6VK45XP/Second...sword-pair.jpg )
Sannce Registered P2P account ( Annke Sannce Registered Vision Guarding Vision Cloud P2P App Account User Name and Password by Email Addres
https://excelfox.com/forum/showthrea...ll=1#post15913 )
Information necessary for successful setting up of the Cloud P2P, and/ or its subsequent use, is held somewhere remotely by Sannce. It can only be held by a single account at any time.
So ether
_ (For -B- ) You need to know the username and password of such an account if it exists and it has the information. ( The information and various setting up will be done automatically when you do a necessary logging in.)
or
_ ( For -C- ) If you know that no account is holding this information, you will have to register such an account, and use that.
These two different scenarios correspond to the two next posts,
-B- Cloud P2P remote access if you know the password and username of Sannce registered account holding DVR P2P relevant information
https://excelfox.com/forum/showthrea...ll=1#post15902
-C- Cloud P2P remote access if no Sannce registered account holds DVR information
https://excelfox.com/forum/showthrea...ll=1#post15919
In both the cases, I will assume that the Guarding Vision Software needs to be installed for the first time, but the installation will only be briefly explained
( full details: .exe installation File: https://excelfox.com/forum/showthrea...ll=1#post15901 ;
Installation: https://excelfox.com/forum/showthrea...ll=1#post15902
First use : https://excelfox.com/forum/showthrea...ll=1#post15901 )
Reply With Quote
Bookmarks