Getting started on a pc with Sannce2 ( it has Guarding Vision Software )
The Guarding Vision manual is massive, difficult to read and totally useless for getting started on a pc. It appears that everyone scans a the square of black squares QR code, and then everything else falls into space with a few wipes of the thumb. I expect the manual is only good for later reference to the massive amount of feature that appear to be available.
What comes with such a receiver in terms of manuals, instructions, hard copy of software a, quick start guides, etc., seems to be a bit poorly organised. You will likely get the software and instructions relevant for your model, but whether they are up to date, or any use at all, is a bit hit and miss.
It is likely that your best bet is to briefly look through all that is supplied then try to find some on line info, such as the following.
Following this:
https://support.sannce.com/hc/en-us/...arding-Vision-
Working software at time of writing:
Share ‘Guarding-Vision.exe’ : https://app.box.com/s/fi3eumo8m6sq8tztlxgheftuxqtq5f5b
( Later I got the impression , that contacting support for my receiver model usually results in some blind reference to this article. The article is incomplete, but is probably your best bet. )
The thing to do with a new receiver is to look on the internet, possibly at Sannce support articles , get the latest software downloaded and take it from there
Download / Install Guarding Vision
The download and install was very typical
Note: Get the internet working or don’t bother to go further
Sannce receivers are very unreliable. ( !!!! Their support is close to useless. Some of their downloads are corrupt and have viruses in them )
The receivers usually will work reliably after power up to display the cameras on a television or monitor screen , but their internet function can stop working.
Throughout the following process I had a working Rj45 LAN Ethernet-Network cable connected , and on the DVR the furthest right green light flickers indicating a successful internet source.
If you have a working connection to a monitor, then on power up their will likely be some indication of a successful connection to the internet.
If you can’t get this apparent stable internet connection, don’t bother to go further.
Download software
The download and install was very typical
InstallWizard2.JPG http://i.imgur.com/X3RdzQm.jpg
InstallWizard3.JPG http://i.imgur.com/auEGcoe.jpg
InstallWizard4.JPG http://i.imgur.com/qRS0pwQ.jpg
InstallWizard5 Installing.JPG : http://i.imgur.com/30gYaan.jpg
InstallWizard6 Installing.JPG : http://i.imgur.com/1QRjWA2.jpg
InstallWizard7 Installing.JPG : http://i.imgur.com/tnQPTTb.jpg
InstallWizard8 Install Finish.JPG : http://i.imgur.com/BCaYc9a.jpg
Double click the icon and away you go
Installed Icon.JPG : http://i.imgur.com/NvZCwDi.jpg
Dont Block Anymore.JPG : http://i.imgur.com/kHXO4yL.jpg
By first use of software, you set a password, this is the password by first use of Guarding Vision
RegisterAdministrator.JPG : http://i.imgur.com/KpebVJF.jpg
( This is not the first power up password typed into screen using mouse, but you will need that later …………..
Username -- left at admin
Password -- tried to leave it empty, but it wouldn’t allow it, so gave it Sannce.!* using mouse on a Handy type keyboard which appeared after clicking with mouse in entry bar )
Installed software:
Super User DocAElstein
Password Gaudy.!*
RegisterAdministrator2.JPG : http://i.imgur.com/WQUNqyB.jpg
At 52% Initialising it hanged for a while, then jumped to 83 % and had the block window for the second time
Dont Block Anymore2.JPG : http://i.imgur.com/6FOG87Z.jpg
After finish got an extra window not detailed in the instruction at https://support.sannce.com/hc/en-us/...arding-Vision- This seemed to be suggesting I look a t Help
Extra Help Indicator.JPG : http://i.imgur.com/pc2hnzg.jpg
Throughout the above process I had a working Rj45 LAN Ethernet-Network cable, and on the DVR the furthest right green light flickers indicating a successful internet source.
As a result of this, on selecting Device Manager, the Guarding Vision software in the lower window seems to recognise the router and catches the following details about it as well as the Guarding Vision associated info:
DeviceManager.JPG : http://i.imgur.com/RESQeMZ.jpg
DeviceManager2.JPG : http://i.imgur.com/8qLPfds.jpg
IP: 192.168.2.106
Device Type: DN81BL
Firmware Version: V4.30.100build 191122
Security: Active
Server Port: 8000
Device Serial No.: DN81BL0820200601CCWRE47044632WCVU
DN81 BL08 2020 0601 CCWR E470 4463 2WCV U
Start Time: 2021-01-10 21:21:01
Added: No
Support Guarding Vision : Yes
Guarding Vision Status: Disabled
OnlineDevice.JPG : http://i.imgur.com/imFm8fP.jpg
OnlineDevice2.JPG : http://i.imgur.com/VCeY8Me.jpg
OnlineDevice3.JPG : http://i.imgur.com/5xxZD77.jpg
OnlineDevice.JPGOnlineDevice2.JPG
Reply With Quote
Bookmarks