Page 1 of 6 123 ... LastLast
Results 1 to 10 of 52

Thread: ब्लॉग कोशिश कर रहा है بلاگز کی ک*Trying Blogs

  1. #1
    Fuhrer, Vierte Reich DocAElstein's Avatar
    Join Date
    Aug 2014
    Posts
    9,429
    Rep Power
    10

    ब्लॉग कोशिश कर रहा है بلاگز کی ک*Trying Blogs

    Trying Blogs ब्लॉग कोशिश कर रहा है ബ്ലോഗുകൾ ശ്രമിക്കുന്നു
    بلاگز کی کوشش کر رہے




    The purpose of this Thread is the following:
    इस धागे के उद्देश्य निम्नलिखित है:
    ഈ ത്രെഡ് ഉദ്ദേശ്യം പിന്തുടരുന്നു:
    :یہاں مقصد مندرجہ ذیل ہے



    Codes and Information is here.
    संहिताओं और सूचना यहाँ हैं।
    കോഡുകൾ സമവാക്യങ്ങളേയും വിവരങ്ങൾ ഇവിടെ ഉണ്ട്.
    کوڈز اور معلومات یہاں پایا جائے.



    1)
    To be referenced in this web site
    इस वेब साइट में संदर्भित किया जा करने के लिए
    ഈ വെബ് സൈറ്റിൽ പരാമർശിച്ചിരിക്കുന്ന ലഭിക്കണമെങ്കിൽ
    ان خطوط اس ویب سائٹ سے محولہ کیا جائے گا


    2)
    Also to be referenced from other web sites
    इसके अलावा अन्य वेब साइटों से संदर्भित किया जा करने के लिए
    മറ്റ് വെബ് സൈറ്റുകളിൽ നിന്നുള്ള പരാമർശിച്ചിരിക്കുന്ന ചെയ്യുവാൻ
    اس کے علاوہ دیگر ویب سائٹس سے محولہ کیا جا کرنے


    _...........
    This has been agreed with the Administrator
    यह व्यवस्थापक द्वारा सहमति व्यक्त की है
    ഈ അഡ്മിനിസ്ട്രേറ്റർ സമ്മതിച്ചു ഉണ്ടായിരുന്നു
    یہ ایڈمنسٹریٹر کی طرف سے اس بات پر اتفاق کیا ہے


    http://www.excelfox.com/forum/showth...eded#post10071
    http://www.excelfox.com/forum/showth...age2#post10082

    There are no restrictions on posting here
    यहां पोस्टिंग पर कोई प्रतिबंध नहीं कर रहे हैं
    ഇവിടെ പോസ്റ്റുചെയ്യുന്നതിന് നിയന്ത്രണങ്ങൾ ഒന്നുമില്ല
    یہاں پوسٹنگ پر کوئی پابندی نہیں ہے


    There is no time limit on Editing ( Only here in Test Sub Forum )
    संपादन पर कोई समय सीमा नहीं है ( केवल परीक्षण उप फोरम में )
    എഡിറ്റിംഗ് യാതൊരു സമയ പരിധിയുമില്ല ( മാത്രം ഉപ ഫോറം ടെസ്റ്റ് )
    ترمیم پر کوئی وقت کی حد نہیں ہے
    ( صرف ذیلی فورم ٹیسٹ )


    I will re use some posts. By Editing. There is no time limit on Editing
    मैं फिर से उपयोग होगा कुछ पदों . बदलें संपादन . संपादन पर कोई समय सीमा नहीं है.
    ഞാൻ ചില ഭാഗങ്ങളിൽ പുനരുപയോഗിക്കാൻ ചെയ്യും. എഡിറ്റ് സാധ്യമാണു് . എഡിറ്റിംഗ് യാതൊരു സമയ പരിധിയുമില്ല
    ترمیم پر کوئی وقت کی حد نہیں ہے میں ترمیم کو استعمال کرتے ہوئے I ادلیکھت کبھی کبھی کریں گے بنانے کے.



    Alan


    _.________________________________________________ _______________________

    Quick links
    Variable definitions : http://www.excelfox.com/forum/showth...0192#post10192





    Last edited by DocAElstein; 03-28-2018 at 12:17 AM.
    ….If you are my competitor, I will try all I can to beat you. But if I do, I will not belittle you. I will Salute you, because without you, I am nothing.
    If you are my enemy, we will try to kick the fucking shit out of you…..
    Winston Churchill, 1939
    Save your Forum..._
    _...KILL A MODERATOR!!

  2. #2
    Fuhrer, Vierte Reich DocAElstein's Avatar
    Join Date
    Aug 2014
    Posts
    9,429
    Rep Power
    10

    VBA Remove BB Code Code Tags in text

    VBA Remove BB Code Code Tags in text

    In the next post is a code to remove BB Code Code Tags in text

    This code is slightly redundant since I was given a simpler one ,
    http://www.eileenslounge.com/viewtop...202145#p202122
    which probably is more Full proof !
    But I include it here with description for future reference. I may use it in a following code or codes to cross check the results given.
    The code is intended to remove valid BB Code Code Tag sections from a Text string.
    In this case, valid means in terms of the syntax, which is basically as follows

    [TagWord=Some]Any text[/TagWord] or [B]Any text[/b]

    An arbitrary string is given initially in code section Rem 1)
    "gggg[d=fg]2[/d]45[/8]x[ddd[Cl=XYZ][/Cl][B]Any text[/b]"


    Then the main code is as follows

    Rem 2 Brief Code description
    The code works backwards 100 through the whole string. It looks at a character at a time.
    120 __ On If finding a ] , it notes the position of it,
    140 BcrdEEnd, then keeps going back.
    160___If it finds another it notes that as the ] position and carries on going back.
    170 It determines the position of a [ , BcrdESt, by looking for a [\
    It starts looking again for the next ] ,
    250 _____If a ] is found, it checks
    260 _____If the next character back is another ], Then it keeps going back. If the next character back was Not a ] , then the position of the ], BcrdSEnd, is
    270 noted
    A new last loop 290 starts going further back to look for a [
    300 ________If it finds a [ , it notes that, BcrdSSt.
    320 ________If in the unlikely event that it is a start of an end , like [\ then we have found a second End BB Code Code Tag so we do like_..
    BcrdEEnd = BcrdSEnd:
    BcrdESt = BcrdSSt:
    BcrdSEnd=0:
    ( BcrdSSt=0 )
    _..and go back and start again looking for the start tag. Otherwise the start position of the start tag, BcrdSSt, is noted, then it is finally time to go and think about getting rid of the code tag pair whose positions have now been determined....
    430 FkOffCrd:
    _..So I come to a point, aptly named, Rem 3) "I think we come here with a complete set of 4 positions". So I try to take the BB Code Code Tags out. As I am going backwards, the new string with the missing Code Tag pair does not mess up me going through the characters as I took off stuff “behind me”
    450 I overdo the use of variables here because I can and do, but also because a development of the code might be to look through a list of available BB Code Code Tags to check I have them . I do one quick validity check: I check that the word after the / in the End BB Code code tag is the same as the word in the start BB Code code tag ( that before an = , if there is an = ) . Only
    500____ If this condition ( which must be met for a valid BB Code code tag ) is met are the pair of tags removed by replacing them with , . Another condition is also checked: a / in second character of the stop tag.

    Either from going through a code section search with possible removal, or ,
    540 Else not , we are at the Next posCurrent of the main going backward Loop,
    580 , so keep going back looking for another, or a first possible start ( looking from the back ).
    Hopefully, for example at line 340, posCurrent would have been reduce to allow for the inner Loops going back in a code tag section search.


    _................................

    The code returns the string:
    gggg245[/8]x[ddd[B]Any text[/b]
    Last edited by DocAElstein; 02-11-2017 at 10:29 PM.
    ….If you are my competitor, I will try all I can to beat you. But if I do, I will not belittle you. I will Salute you, because without you, I am nothing.
    If you are my enemy, we will try to kick the fucking shit out of you…..
    Winston Churchill, 1939
    Save your Forum..._
    _...KILL A MODERATOR!!

  3. #3
    Fuhrer, Vierte Reich DocAElstein's Avatar
    Join Date
    Aug 2014
    Posts
    9,429
    Rep Power
    10
    Code described and ExPlained in last post


    Code described and ExPlained in last post
    I just said that


    Code:
    Sub LongWayOfDoingIt()
    10   Rem 1) Test string
    20   Dim strBBCode As String '
    30    Let strBBCode = "gggg[d=fg]2[/d]45[/8]x[ddd[Cl=XYZ][/Cl]]Any text"
    40   Dim strRmveBBCode As String: Let strRmveBBCode = strBBCode ' This will be adjusted until finally has no BBCode tag pairs
    50   Dim Lstr As Long ' This will be adjusted as necerssary for current length    ' Long is very simple to handle, - final memory "size" type is known (123.456 and 000.001 have same "size" computer memory ) , and so a Address suggestion can be given for the next line when the variable is filled in.  '( Long is a Big whole Number limit (-2,147,483,648 to 2,147,483,647) If you need some sort of validation the value should only be within the range of a Byte/Integer otherwise there's no point using anything but Long.--upon/after 32-bit, Integers (Short) need converted internally anyways, so a Long is actually faster. )
    60    Let Lstr = Len(strBBCode)
    70   Rem 2) Loop through and get a BB Code section
    80   Dim strBBCodePair As String ' for a found valid pair  '
    ' Prepares "Pointer" to a "Blue Print" (or Form, Questionaire not yet filled in, a template etc.)"Pigeon Hole" in Memory, sufficient in construction to house a piece of Paper with code text giving the relevant information for the particular Variable Type. VBA is sent to it when it passes it. In a Routine it may be given a particular “Value”, or (“Values” for Objects).  There instructions say then how to do that and handle(store) that(those). At Dim the created Paper is like a Blue Print that has some empty spaces not yet filled in. A String is a a bit tricky. The Blue Print code line Paper in the Pigeon Hole will allow to note the string Length and an Initial start memory Location. This Location well have to change frequently as strings of different length are assigned. Instructiions will tell how to do this. Theoretically a specilal value vbNullString is set to aid in quich checks.. But..http://www.mrexcel.com/forum/excel-questions/361246-vbnullstring-2.html#post44116
    90   Dim posCurrent As Long 'Current position in the string' Loop Bound variable Count '_-Main Loop==========================
    100      For posCurrent = Lstr To 2 Step -1 'Important to go backwards as we chop off behind us so have a less complicated current position. We look at pos-1 in some code parts so we would error if we went back to less than 2
    110      '2a) Check for a ] Most likely a end of end tag                     ' ---Loop To find  ]
    120          If Mid(strRmveBBCode, posCurrent, 1) = "]" Then
    130          Dim posBBCodeTagSrch As Long '
    140          Dim BcrdEEnd As Long: Let BcrdEEnd = posCurrent 'Position of possible End Code Tag End ' ---Loop To Find [/--
    150                For posBBCodeTagSrch = posCurrent - 1 To 2 Step -1 'PosCurrent is set here at loop start. ###It is not effected by cardinally sining changing PosCurrent Loop Bound variable caount in Outer main Loop
    160                  If Mid(strRmveBBCode, posBBCodeTagSrch, 1) = "]" Then Let BcrdEEnd = posBBCodeTagSrch: GoTo NxtCESPosPos ' If we hit another ] then change the stop tag stop character position and start again to see if is a valid BB code section
    170                  If Mid(strRmveBBCode, posBBCodeTagSrch, 1) = "/" And Mid(strRmveBBCode, posBBCodeTagSrch - 1, 1) = "[" Then 'We hit start of a BB Code end tag
    180                  Dim BcrdESt As Long: Let BcrdESt = posBBCodeTagSrch - 1   'Position of End Code Tag Start
    190                   Exit For ' We leave this For the End Code Tag Start Search, Exit For with a [ at posBBCodeTagSrch-1
    200                  Else 'Not found start of end Tag or stop of end Tag.
    210                  End If
    220 NxtCESPosPos:  Next posBBCodeTagSrch ' go back in possible BB code string ' ---End Loop to find [/---------------------
    230          If posBBCodeTagSrch = 3 Then Exit Sub 'case we never found the start of an End Code Tag
    235      '2b) Check for a ] Most Likely end of start tag                      ' ---Loop to find  ]
    240                For posBBCodeTagSrch = posBBCodeTagSrch - 2 To 2 Step -1 ' Once again ### the start is set and fixed, the Loop Bound Variable Count will change
    250                  If Mid(strRmveBBCode, posBBCodeTagSrch, 1) = "]" Then
    260                  If Mid(strRmveBBCode, posBBCodeTagSrch - 1, 1) = "]" Then GoTo NxtCSSPosPos ' If we hit another ] then start again to see if is a valid BB code start section
    270                  Dim BcrdSEnd As Long: Let BcrdSEnd = posBBCodeTagSrch  'Position of possible Start Code Tag End
    280                  Dim LTagStLoop As Long 'Last loop to find start of start Code Tag
    290                      For LTagStLoop = posBBCodeTagSrch - 1 To 1 Step -1 '_-Most Inner loop_______to find [/____________
    300                          If Mid(strRmveBBCode, LTagStLoop, 1) = "[" Then
    310                          Dim BcrdSSt As Long 'Have to put it here, - I may occaisionally have to set it to 0 in next line
    320                             If Mid(strRmveBBCode, LTagStLoop + 1, 1) = "/" Then Let BcrdEEnd = BcrdSEnd: Let BcrdSEnd = 0: Let BcrdESt = LTagStLoop: Let BcrdSSt = 0: Let posBBCodeTagSrch = LTagStLoop: GoTo NxtCSSPosPos ' Found a second end Code Tag. So change the previous found start and stop , and adjust the Loop Bound variable Count appropriately for a new search for a start Code Tag
    330                           Let BcrdSSt = LTagStLoop
    340                           Let posCurrent = BcrdSSt 'End of Code Tag section search
    350                           GoTo FkOffCrd ' We leave this For the start Code Tag Start Search and go to Fuk Off Crd:
    360                          Else ' Still looking for start of start Code Tag
    370                          End If
    380                      Next LTagStLoop '_- End Most inner loop_____________________to find [/_____________________________
    390                      If LTagStLoop = 1 Then GoTo TheEnd 'Case I think we failed to find a start start [ for the complete possible Code Tag section search
    400                  Else 'Not found end of start Tag or start of start Tag
    410                  End If
    420 NxtCSSPosPos:  Next posBBCodeTagSrch ' go back in possible BB code string' ---End Loop to find  ]
    425                If posBBCodeTagSrch = 0 Then GoTo TheEnd ' For any outer search failed to find a ] at all or a search for matching start tag that was fruitless
    430 FkOffCrd:  Rem 3) "I think we come here with a complete set of 4 positions"
    440              If BcrdEEnd <> 0 And BcrdESt <> 0 And BcrdSEnd <> 0 And BcrdSSt <> 0 Then 'Just to check'
    450              Dim SttBcrd As String, StpBcrd As String ' Start and stop tags as coplete strings including [ and ]
    460               Let SttBcrd = Mid(strRmveBBCode, BcrdSSt, BcrdSEnd - BcrdSSt + 1) ' ' like |Color=Red|
    465               Let StpBcrd = Mid(strRmveBBCode, BcrdESt, BcrdEEnd - BcrdESt + 1) ' ' like |/Color|
    470              Dim SttWrd As String, StpWrd As String
    480               Let StpWrd = Mid(StpBcrd, 3, Len(StpBcrd) - 3) ' like Color from |/Color| - Whole Word, from 3rd Chr , for Length as  WholeWord-3
    490               Let SttWrd = Mid(SttBcrd, 2, Len(StpWrd))      ' like Color from |Color=Red|
    500                  If UCase(SttWrd) = UCase(StpWrd) And Mid(StpBcrd, 2, 1) = "/" Then 'Ucase allows for differences in cases                                     And Mid(SttBcrd, Len(SttWrd) + 2, 1) = "=" Then
    510                   Let strRmveBBCode = Replace(strRmveBBCode, SttBcrd, "", 1, 1) ' Replace in ( strRmveBBCode , the start tag , with no string , start loooking from and return from character 1 )
    515                   Let strRmveBBCode = Replace(strRmveBBCode, StpBcrd, "", 1, 1)
    520                  Else 'No shortening of string for non matching tag word
    530                  End If
    540              Else 'No shortening of string for not all 4 [ and ] found. Not sure if I ever come here..
    550              End If
    560      Else ' no last ] of a possible Code section yet, so keep going back down in the main string , main loop
    570      End If
    580      Next posCurrent '_-===Main Loop========================================================================================
    590 TheEnd:
    600   MsgBox Prompt:="" & strRmveBBCode & "": Debug.Print "" & strRmveBBCode & "" 'Hit Ctrl+g when in VB Editor Window,  reveal Immediate window after code run
    End Sub
    Last edited by DocAElstein; 02-27-2017 at 01:39 AM.
    ….If you are my competitor, I will try all I can to beat you. But if I do, I will not belittle you. I will Salute you, because without you, I am nothing.
    If you are my enemy, we will try to kick the fucking shit out of you…..
    Winston Churchill, 1939
    Save your Forum..._
    _...KILL A MODERATOR!!

  4. #4
    Fuhrer, Vierte Reich DocAElstein's Avatar
    Join Date
    Aug 2014
    Posts
    9,429
    Rep Power
    10

    Wild Things. You make my heart sing. They make everything..... Groovy

    The VBA code in the last few posts is a bit of a long way around of doing what can be done in a Word Dialogue box type thing using Wild things:
    http://www.gmayor.com/replace_using_wildcards.htm
    http://imgur.com/4Nqj1HP

    The problem is getting at the Wild Things needed in the Wild Find String.

    I can’t do it. But Hans and Paul did it for me here:
    http://www.eileenslounge.com/viewtop...=26030#p202107

    Here is my attempt at an ‘ExPlanation of the solution:

    Wild Things. You make my heart sing. They make everything….. Groovy


    Wild Things. You make my heart sing. They make everything….. Groovy
    http://listenonrepeat.com/watch/?v=H...s_-_Wild_Thing
    Wild things…. I think I hate you .. But I wanna know for sure… so

    A Summary
    As example. We want to remove the start and stop tags in a sample string containing a start and stop tag such as this_..
    [color=Green]This is green[/color] This ‘aint matey

    _.. What we finally want is this:
    This is green This ‘aint matey

    We use a combination of Wild things , or like a pattern to search for [ Find ] any bits like _..
    [color=Green]This is green[/color]
    _.. and [ Replace ] that “Find”ed with
    This is green

    We can do, it Wildly, man, as follows:
    As always the search is done from left to right

    The way I do it below is probably not the most efficient way, in fact it is probably pretty stupid, but is just to demo the idea
    Optional use of ( ) in the Wild thing search string
    We can use brackets ( ) , optionally , to identify, ( for later use ) , the exact string parts found by the constituent Wild things in the ( ) in which they are in:
    So in this example we will use a ( ) for
    _ the Wild things that find the color so that the actual word color can be used again in the same wild stuff string, so as to make sure that we find in the end tag the matching word to that in the start tag.
    _ Also we need a ( ) to identify the wild things that Find This is green , as we want to use that in , or rather for the complete, Replace string.
    A bracket is identified by , for example, \2 if I want to reference the actual string found by the wild things we enclose in the second ( )

    Build up final Wild thing Replace string, left to right, by breaking string we want up into bits. Each bit will be found by a Wild thing or things
    So we are looking to break the to search for Wild [ Find ] Thing string down thus:
    Code:
    [ & ( AnythingWithout=or] )  & anything &  ]  & (Anything) &  [\ & \1 & ]
    So I am breaking it down in to 8 bits. So I need 8 sections of wild stuff to Find those.
    \1 is at the 7th position and refers to what is actually found by the search for ( AnythingWithout=or] ) at position 2 ( which is bracket ( ) number 1 )


    Excel starts at the left. What no literature really states clearly ( and is only obvious once you know it ) is this:
    _ For most sections, Excel keeps going to the right until it Finds what the Wild thing tells it to. That is then stored, but only if that found string also has joined to it the string type in the next section’s Wild thing. Those two sections are then stored ( as well as storing separately if either of those two sections are enclosed in ( ) ), but only if that found string also has joined to it the string type in the next section’s Wild thing. That is then stored, but only if that found string also has joined to it the string type in the next section’s Wild thing. ……..etc.
    A common Wild thing is * . This means anything characters and any amount. This will only include, however, anything up to if and when the next Wild thing is satisfied.

    The 7th Wild thing I already have which is \1 which is referring to the 1st bit enclosed in a ( ) , which is the second bit in the broken up string , ( which is anything without a = or a ] . In our example this will be color) . Note: The number refers to the number from the left of any ( ) that I may have included, not the actual sections.
    Just to make that last point clear, and to demonstrate another, I will do this_..
    Code:
    [ & ( AnthingWithout=or] ) & ( Anything &    ] ) & (Anything) & [/ & \1 & ]
    _.. so my Replace is then \3 . I do not need the second ( ___ ) , which I could reference by \2, ( and it can help to result in an “expression too complex” error ! ).
    I put the second ( ___ ) in also to demo that a ( __ ) can include more than one wild bit



    So here is one example Find sting with Wild things that “works” ( I added spaces to show better the 8 sections, but in use those spaces must be removed ). There are three optional ( ) sections. The second ( ) section encloses two Wild thing sections: Those are the third and forth counting from the left.

    Code:
     [\[]    ([!\]=]@)    (*     \])    (*)    \[/    (\1)     \]
    This is the actual Wild Find string
    ___ [\[]([!=\]]@)(*\])(*)\[/(\1)\]

    To '_- ExPlain the 8 parts:
    Part 1 [\[]
    Excel start “looking” from the left to find a [
    As a general rule Wild things are enclosed in a [ ] pair to identify them as such. So a [ ] is a Wild thing. They do not always have to be enclosed in a [ ], as is the case here. Here we are effectively looking to Find a single simple character, [.
    ( In the final Find string, only the second Wild section needs to be enclosed partly in a [ ] pair ).
    So this section written as \[ instead is just as good. I suspect my use of the extra [ ] here does not have any bad effects, as it might be that the final string would be at compile or whatever reduced to \[ in either use of \[ or [\[]
    We need to use the Wild thing, \ , quite a bit , in our total string for the same reason that we do here: This is because the \ has another use in Wild things in addition to the already discussed way like \7 ( where 7 would be for the 7th ( ) ). This other use of \ is to allow us to use characters as simple text which have a specific use in Wild things, so that Excel knows that we want to use them as their literal text string, rather than as Wild thing. Here it is needed for the first [ which we want to find.
    ( It follows that if we were looking for a \, then we would need to use \\ )
    In our example string we find with this first Wild thing section the first [

    Part 2 ([!\]=]@)
    As noted the ( ) allows the string actually found in this Wild bit to be used later to the right via the reference \1.
    As for this:
    [!\]=]@ ( which could just as well be written [!=\]]@ )
    We need a [ ] pair here, as within that is part of the Wild instructions for what to search for , and that has a further Wild instruction, @ , applied to that.
    So in such a [ ] pair we would normally expect some specific wild stuff
    Here the Wild thing, ! , means we search for any character other than those after included up to the closing tag ]. In our sample string , our first Wild bit found the first [ which now has added on any string at the next character if it is not a = or a ]
    So this part of the second wild bit will find c in our sample string. If we had no other wild instructions here, then Excel would be content/ satisfied with that c. That would be joined on to the first [ found, so our result so far would be [c . In effect Excel stops going to the right when it is satisfied, and goes on to the next Wild bit. But we have another wild instruction here: The @ instructs to look for any amount of characters meeting the conditions before it, in this case the conditions in the [ ]. So the “Find” will stop finding characters when it no longer has a not = or a not ]. In our sample string the characters meeting the conditions are tacked on to a [ so will be will be [color. What [!\]=]@ has actually found and what the brackets ([!\]=]@) can be thought of as “holding” is color.
    An alternative for @ would be {1,} which looks for between 1 and any amount of what is before it.
    If we had used {1,4} or {2,4} instead of @ we would have so far for the complete found string [colo
    If we had used {5,5} we would not have found a matching code tag word with less than 5 characters.

    Parts 3 and 4 (*\])
    This is unnecessarily in ( ) . *\] will do
    The literature says * looks for any amount of anything. I think that is not strictly correct, or at least, explains it badly. It would appear to look for any amount of anything only until the next wild condition is met. That is why I chose to put it in ( ) just to demo the dependence, as it were. But this (*)(\]) or this *\] would work just as well (*)(\]).
    Once again the \ is required for telling Excel that we want it to recognise ] as a string rather than a specific Wild thing. For this section , with my example string, I get from this complete 2 part Wild section
    =green]
    If our code tags were of the form like: [b]SomeBoldText[/b] , then the search would have “stopped before it started”, as it were, as the ] would have “stopped” it
    The combination of the 2 part Wild sections in this case would return just the single text character ]


    Parts 5 and 6 (*)\[/
    I contradict what I said in the last section slightly by using a ( ) around the * . Once again the * does nothing useful without the next wild bit to “stop” it. But what it does Find before it “stops” is what we actually need for Replace string. Hence I need a ( ) to reference what it Finds. This total Part 5 and part 6 section returns in our example
    This is green[/
    and the part referenced inside the ( ) is
    This is green

    Part 7 (\1)
    As discussed already here the Wild thing, \1 , instructs to Find a string equal to that actual text found in the first ( ) if it is just before the next to be found ( which we will see in the next Part is the last character pair found, [/ ). The actual string found by [!\]=]@ in Part 2 , was , in our example the text color

    Part 8 \]
    Finally only a complete final Find attempt is successful if the last character is a ] , that is to say if the character after the text, in our example, the second color, is a ]

    _...

    The Final “Find”ed String for our example would be

    [ & color & =Green & ] & This is green & [/ & color & ]
    Last edited by DocAElstein; 02-14-2017 at 08:22 PM.
    ….If you are my competitor, I will try all I can to beat you. But if I do, I will not belittle you. I will Salute you, because without you, I am nothing.
    If you are my enemy, we will try to kick the fucking shit out of you…..
    Winston Churchill, 1939
    Save your Forum..._
    _...KILL A MODERATOR!!

  5. #5
    Fuhrer, Vierte Reich DocAElstein's Avatar
    Join Date
    Aug 2014
    Posts
    9,429
    Rep Power
    10
    Here is a simple code to use the Find and Replace discussed in the last Post
    The code should go in a code module in a WORD .docm File
    Before rung the code, a text which includes BBCode Code Tags , should be selected in a Word document.

    The Code makes a temporary File, "TempBBCodeCopy1.docx", holding the original selected text, then removes the BB Code Code Tags from the text and saves that as another temporary File, "TempNoBBCodeCopy2.docx"



    Code:
    Sub WegDaMitHansPaulAlan() '    http://www.eileenslounge.com/viewtopic.php?f=26&t=26030#p202223
    Rem Code Part 1) make two temporary Word Files with and without BB Code
    Rem 1) Copy selection to Clipboard
     Selection.Copy
    Rem 2) Make temporary WORD document
    Documents.Add: ActiveDocument.Content.Paste
    ' 2b) Copy of Full Text with BB Code
    Dim FullFilePathAndFullNameBBCode As String
     ActiveDocument.SaveAs Filename:="TempBBCodeCopy1.docx", FileFormat:=wdFormatXMLDocument
     Let FullFilePathAndFullNameBBCode = ActiveDocument.Path & "\" & ActiveDocument.Name
    Rem 3) Replace Code tag pairs with what is in between
     Selection.WholeStory
        With Selection.Find
        .ClearFormatting: .Replacement.ClearFormatting
        .Wrap = wdFindStop
        .MatchWildcards = True '
        .Text = "[\[]([!=\]]@)(*\])(*)\[/(\1)\]" ' 8 sections, 4 identified with ( ) but I only need two ( )
        .Replacement.Text = "\3" ' The third of the 4 sections identified with a ( )
        .Execute Replace:=wdReplaceAll
        End With
    ' 3b) Copy of Colored Text without BB Code Code tags
    Dim FullFilePathAndFullNameNoBBCode As String
     ActiveDocument.SaveAs Filename:="TempNoBBCodeCopy2.docx", FileFormat:=wdFormatXMLDocument
     Let FullFilePathAndFullNameNoBBCode = ActiveDocument.Path & "\" & ActiveDocument.Name
    Rem 4) "Reset the "Find Replace Text Dialogue" "Thing" "
     ActiveDocument.Select
     Selection.WholeStory
        With Selection.Find
        .ClearFormatting: .Replacement.ClearFormatting: .Text = "": .Replacement.Text = "":  .Forward = True: .Wrap = wdFindAsk: .Format = False: .MatchCase = False: .MatchWholeWord = False: .MatchKashida = False: .MatchDiacritics = False: .MatchAlefHamza = False: .MatchControl = False: .MatchWildcards = False: .MatchSoundsLike = False: .MatchAllWordForms = False '
        End With
    Rem 5) Option to close / kill document
     ActiveDocument.Close (wdDoNotSaveChanges)
     'Kill FullFilePathAndFullNameBBCode
     'Kill FullFilePathAndFullNameNoBBCode
    End Sub ' End Code Part 1)
    ….If you are my competitor, I will try all I can to beat you. But if I do, I will not belittle you. I will Salute you, because without you, I am nothing.
    If you are my enemy, we will try to kick the fucking shit out of you…..
    Winston Churchill, 1939
    Save your Forum..._
    _...KILL A MODERATOR!!

  6. #6
    Fuhrer, Vierte Reich DocAElstein's Avatar
    Join Date
    Aug 2014
    Posts
    9,429
    Rep Power
    10

    Full Code "Belt and Braces” in Word Find Replace & String Manipulation of initial Text String in Clipboar

    Full Code "Belt and Braces" in Word Find Replace & String Manipulation of initial Text String in Clipboard


    This code is simply doing the two ways to remove BB Code code tag pairs from a copied to the clipboard Text from a Word document.
    A check is then done Finally to see if the two raped from tags strings are the same.

    I would not be surprised if a fail in the strings match just means that the second method, ( my long string manipulation way ) is getting it wrong.. Lol.. but never mind ***
    ***Edit:
    - like I just did: It will not work for nested BBCode code tags like
    [CENTER][B]Issue Forum for Issues suggestions for improvement Forum for Issues obfuscation[/B][/CENTER]
    This is OK
    [B]Issue Forum for Issues suggestions for improvement Forum for Issues obfuscation[/B]


    That will do for this one, I guess I will have to do a recursion wonk to get a version working with nested BB Code Tag code tags,
    _.____________-

    Ok. Here we go:
    This code _..
    Sub BBCodeCodeTagsWegDaMit2AlanHansPaul2()
    _.. is mostly just splicing together codes
    Sub WegDaMitHansPaulAlan()
    and
    Sub LongWayOfDoingIt()
    along with adding a short section, Rem 10a) to check that the strings are the same. That is to say the
    Full Story selection text from the modified ( removed BB Code code tags ), NewWordText for Code Part 1)
    is
    compared with the final RapedText from the long string manipulation Code part 2)

    The code is all one code and broken down into this and the next three posts

    Code part 1 of 4 parts ( all following parts to be copied directly under the preceding part in the same code module.
    Code:
    Sub BBCodeCodeTagsWegDaMit2AlanHansPaul2() ' http://www.excelforum.com/development-testing-forum/1086445-forum-tools-test-no-reply-needed-4.html#post4586680
    ' === Code assumes you have a Word File open, and have selected some Text
    ' One way is automating doing it in Word.    "Wild Things. You make my heart sing. They make everything….. Groovy"       '_-   http://www.eileenslounge.com/viewtopic.php?f=26&t=26030#p202322
    Rem 0) ' Just mucking about a bit with refering to Word documents
    ' Documents.Item("eileenslounge.docm").Activate
    'Dim DocNme As String               ' ' Prepares "Pointer" to a "Blue Print" (or Form, Questionaire not yet filled in, a template etc.)"Pigeon Hole" in Memory, sufficient in construction to house a piece of Paper with code text giving the relevant information for the particular Variable Type. VBA is sent to it when it passes it. In a Routine it may be given a particular "Value", or ("Values" for Objects).  There instructions say then how to do that and handle(store) that(those). At Dim the created Paper is like a Blue Print that has some empty spaces not yet filled in. A String is a a bit tricky. The Blue Print code line Paper in the Pigeon Hole will allow to note the string Length and an Initial start memory Location. This Location well have to change frequently as strings of different length are assigned. Instructiions will tell how to do this. Theoretically a specilal value vbNullString is set to aid in quich checks.. But..http://www.mrexcel.com/forum/excel-questions/361246-vbnullstring-2.html#post44116
    ' Let DocNme = ActiveDocument.Name  ' ' '_-So A variable in VBA is like the Link to the part of a URL string reducing size site where a few things about the actual Final site is informed about. This area in that site, like a pigion Hole to which the variable refers, ( the "pigeon hole" location address, and all its contents would be defined as the "Pointer". Amongst other things it has a link, a "Pointing part", pointing to actually where all the stuff is
    Dim Doc As Document 'A variable in VBA is like the Link to the part of a URL string reducing size site where a few things about the actual Final site is informed about. This area in that site, like a pigion Hole to which the variable refers, ( the "pigeon hole" location address, and all its contents would be defined as the "Pointer". Amongst other things it has a link, a "Pointing part", pointing to actually where all the stuff is
     Set Doc = ActiveDocument  'EP Set: Fill or partially Fill: Setting to a Class will involve the use of an extra New at this code line. I will then have an Object referred to as an instance of a Class. At this point I include information on my Pointer Pigeon hole for a distinct distinguishable usage of an Object of the Class. For the case of something such as a Workbook this instancing has already been done, and in addition some values are filled in specific memory locations which are also held as part of the information in the Pigeon Hole Pointer. We will have a different Pointer for each instance. In most excel versions we already have a few instances of Worksheets. Such instances Objects can be further used., - For this a Dim to the class will be necessary, but the New must be omitted at Set. I can assign as many variables that I wish to the same existing instance
    Rem Code Part 1) make two temporary Word Files with and without BB Code
    ….If you are my competitor, I will try all I can to beat you. But if I do, I will not belittle you. I will Salute you, because without you, I am nothing.
    If you are my enemy, we will try to kick the fucking shit out of you…..
    Winston Churchill, 1939
    Save your Forum..._
    _...KILL A MODERATOR!!

  7. #7
    Fuhrer, Vierte Reich DocAElstein's Avatar
    Join Date
    Aug 2014
    Posts
    9,429
    Rep Power
    10
    Code part 2 of 4 parts


    Code:
    Rem Code Part 1) make two temporary Word Files with and withouut BB Code
    Rem 1) Copy selection to Clipboard
     Selection.Copy
    Rem 2) Make temporary WORD document 'Bit of a bodge to get the text in a selection: create a Word file and paste to it
    Dim NextTempDoc As Document '
     Documents.Add: ActiveDocument.Content.Paste 'Make a File Copy in current Application based on Default Type : And Paste from Clipoard ( ...!!!...our original selected text ) using the Default Copy which should at least have all the text, which is all we are interested in here.
     Set NextTempDoc = ActiveDocument ' Do this in case i muck about- I do not want to inadvertently close or kill the wrong document
    '2b) Copy of Full Text with BB Code
    Dim FullFilePathAndFullNameBBCode As String '  'Prepares "Pointer" to a "Blue Print" (or Form, Questionnaire not yet filled in, a template etc.)"Pigeon Hole" in Memory, sufficient in construction to house a piece of Paper with code text giving the relevant information for the particular Variable Type. VBA is sent to it when it passes it. In a Routine it may be given a particular “Value”, or (“Values” for Objects). There instructions say then how to do that and handle(store) that(those). At Dim the created Paper is like a Blue Print that has some empty spaces not yet filled in. String is a a bit tricky. The Blue Print code line Paper in the Pigeon Hole will allow to note the string Length and an Initial start memory Location. This Location well have to change frequently as strings of different length are assigned. Instructiions will tell how to do this. Theoretically a specilal value vbNullString is set to aid in quick checks.. But...http://www.mrexcel.com/forum/excel-q...html#post44116
     NextTempDoc.SaveAs FileName:="TempBBCodeCopy1.docx", FileFormat:=wdFormatXMLDocument 'Without this the document will not really "exist jet". It has a tempory name ( Used in Windows referrence ), but no path.
     Let FullFilePathAndFullNameBBCode = NextTempDoc.Path & "\" & ActiveDocument.Name
    Rem 3) From Han's Text Find Replacement Dialogue 'http://www.eileenslounge.com/viewtopic.php?f=26&t=22603#p175712
    '3a) Take out all BB Code
     Selection.WholeStory 'Selects whole document which here is just our selection of interest from the original document
    Dim StrOrg As String: Let StrOrg = Selection.Text '11a)6b)' Original Text to use in string manipultion code of Code Part 2)
        With Selection.Find 'This is the VBA code ( or very similar ) used by Excel when Using the Find eplace text Dialogue box. So this is an improved version of what a macro recording would give.
        .ClearFormatting: .Replacement.ClearFormatting    ' Don't use formating, ? not sure this comes into the equation ??
        .Wrap = wdFindStop    ' Tell Word not to continue past the end of the selection ( And therefore prevents also a display Alert asking )
        .MatchWildcards = True
        .Text = "[\[]([!=\]]@)(*\])(*)\[/(\1)\]" ' 8 sections, 4 identified with ( ) but I only need two ( )
        .Replacement.Text = "\3" ' The third of the 4 sections identified with a ( )
        .Execute Replace:=wdReplaceAll    ' Replace all within selection. This is the "OK" button!
        End With
     Selection.WholeStory: Dim NewWordText As String: Let NewWordText = Selection.Text '´11a) New text for comparison with result from Code Part 2)
    '3b) Copy of Colored Text in Word File without BB Code Code tags
    Dim FullFilePathAndFullNameNoBBCode As String
     NextTempDoc.SaveAs FileName:="TempNoBBCodeCopy2.docx", FileFormat:=wdFormatXMLDocument 'Without this the document will not really "exist jet". It has a tempory name ( Used in Windows referrence ), but no path.
     Let FullFilePathAndFullNameNoBBCode = NextTempDoc.Path & "\" & ActiveDocument.Name
    Rem 4) "Reset the "Find Replace Text Dialogue" "Thing" ". if you do not there may be some changed setting there that could catch you out next time you use it.
     NextTempDoc.Select ' Re select the...( actually this line alone seems to do it )
     Selection.WholeStory '...whole document
        With Selection.Find
        .ClearFormatting: .Replacement.ClearFormatting: .Text = "": .Replacement.Text = "":  .Forward = True: .Wrap = wdFindAsk: .Format = False: .MatchCase = False: .MatchWholeWord = False: .MatchKashida = False: .MatchDiacritics = False: .MatchAlefHamza = False: .MatchControl = False: .MatchWildcards = False: .MatchSoundsLike = False: .MatchAllWordForms = False '
        End With
    Rem 5) Optiion to close / kill document
     NextTempDoc.Close (wdDoNotSaveChanges) ' Giving the option will also prevent being asked for it. You must close. VBA will not let you kill an open sheet, as you are affectively working on a copy, and VBA is assumng the Original can be got at by saving for example.  http://www.mrexcel.com/forum/excel-questions/920451-excel-macro-files.html#post4425428
    'Kill FullFilePathAndFullNameBBCode ' Use the Kill wisely!!!!  - where this goes there 'aint no coming back!!
    'Kill FullFilePathAndFullNameNoBBCode
    
    Rem Code Part 2 Put text without BB code into clipboard
    Rem 6) Use data Object ( assumes we copied to the Clipboard )
    '1 a) Data Object to get the data from the clipboard.
         '_- ExPlanation  Dim  :'_-: For Object variabls: Address location to a "pointer". That has all the actual memory locations (addresses) of the various property values , and it holds all the instructions what / how to change them , should that be wanted later. That helped explain what occurs when passing an Object to a Call ed Fucntion or Sub Routine By Val ue. In such an occurance, VBA actually  passes a copy of the pointer.  So that has the effect of when you change things like properties on the local variable , then the changes are reflected in changes in the original object. (The copy pointer instructs how to change those values, at the actual address held in that pointer). That would normally be the sort of thing you would expect from passing by Ref erence.  But as that copy pointer "dies" after the called routine ends, then any changes to the Addresses of the Object Properties in the local variable will not be reflected in the original pointer. So you cannot actually change the pointer.)
          '_- Explanation  Set :'_-: Fill or partially Fill: Setting to a Class will involve the use of an extra New at this code line. I will then have an Object referred to as an instance of a Class. At this point I include information on my Pointer Pigeon hole for a distinct distinguishable usage of an Object of the Class. For the case of something such as a Workbook this instancing has already been done, and in addition some values are filled in specific memory locations which are also held as part of the information in the Pigeon Hole Pointer. We will have a different Pointer for each instance. In most excel versions we already have a few instances of Worksheets. Such instances Objects can be further used., - For this a Dim to the class will be necessary, but the New must be omitted at Set. I can assign as many variables that I wish to the same existing instance
    'Dim objCliTextCopied As DataObject   '**Early Binding.   This is for an Object from the class MS Forms. This will be a Data Object of what we "send" to the Clipboard. So I name it CLIpboardSend. But it is a DataObject. It has the Methods I need to send text to the Clipboard
    ' Set objCliTextCopied = New DataObject '**Must enable Forms Library: In VB Editor do this:  Tools -- References - scroll down to Microsoft Forms 2.0 Object Library -- put checkmark in.  Note if you cannot find it try   OR IF NOT THERE..you can add that manually: VBA Editor -- Tools -- References -- Browse -- and find FM20.DLL file under C:\WINDOWS\system32 and select it --> Open --> OK.     http://excelmatters.com/2013/10/04/late-bound-msforms-dataobject/
    ' ( or instead of those two lines  Dim obj As New DataObject ).    or  next two lines are.....Late Binding equivalent'
    Dim objCliTextCopied As Object '  Late Binding equivalent'   If you declare a variable as Object, you are late binding it.  http://excelmatters.com/2013/09/23/vba-references-and-early-binding-vs-late-binding/
     Set objCliTextCopied = GetObject("New:{1C3B4210-F441-11CE-B9EA-00AA006B1A69}") ' http://excelmatters.com/2013/10/04/late-bound-msforms-dataobject/
    '6a) Original text string from '11a) The line below means I have nothing to do with the Clipboard yet'  -  see furhter to the right for .Geting From Clipboard for if it had been in it                                                                                                                                                              ' 'Put all?  Clipboard Infomation into Data Object
     objCliTextCopied.SetText Text:=StrOrg  ' I am messing about putting this in data object, then taking it out on 6b) , but I just wanted the code to be more flexible for later use.                             ' ''objCliTextCopied.GetFromClipboard 'All that is in the Clipboard goes in this Data Object initial instance of the Class  This line does not seem to be necerssary for the next Geting Text bit
    ….If you are my competitor, I will try all I can to beat you. But if I do, I will not belittle you. I will Salute you, because without you, I am nothing.
    If you are my enemy, we will try to kick the fucking shit out of you…..
    Winston Churchill, 1939
    Save your Forum..._
    _...KILL A MODERATOR!!

  8. #8
    Fuhrer, Vierte Reich DocAElstein's Avatar
    Join Date
    Aug 2014
    Posts
    9,429
    Rep Power
    10
    Code Part 3 of 4 parts

    Code:
    '6b) get code as long string String. This can be very long
    Dim TextWithBBCodeEnit As String '     'Prepares "Pointer" to a "Blue Print" (or Form, Questionnaire not yet filled in, a template etc.)"Pigeon Hole" in Memory, sufficient in construction to house a piece of Paper with code text giving the relevant information for the particular Variable Type. VBA is sent to it when it passes it. In a Routine it may be given a particular “Value”, or (“Values” for Objects). There instructions say then how to do that and handle(store) that(those). At Dim the created Paper is like a Blue Print that has some empty spaces not yet filled in. String is a a bit tricky. The Blue Print code line Paper in the Pigeon Hole will allow to note the string Length and an Initial start memory Location. This Location well have to change frequently as strings of different length are assigned. Instructiions will tell how to do this. Theoretically a specilal value vbNullString is set to aid in quick checks.. But...http://www.mrexcel.com/forum/excel-q...html#post44116
     Let TextWithBBCodeEnit = objCliTextCopied.GetText() ''retrieve the text in this instance of the Class. ( Our code as a String with probably BB Code Code tags, vbCr vbLf etc.
    Rem 7) Determine length of original text
    Dim LenText As Long '                                      ' Long is very simple to handle, - final memory "size" type is known (123.456 and 000.001 have same "size" computer memory ) , and so a Address suggestion can be given for the next line when the variable is filled in.  '( Long is a Big whole Number limit (-2,147,483,648 to 2,147,483,647) If you need some sort of validation the value should only be within the range of a Byte/Integer otherwise there's no point using anything but Long.--upon/after 32-bit, Integers (Short) need converted internally anyways, so a Long is actually faster. )
     Let LenText = Len(TextWithBBCodeEnit)
     MsgBox prompt:="Text with BB Code Character count is " & LenText
    Rem 8) Take out BB Code bits from text string.
    40   Dim strRmveBBCode As String: Let strRmveBBCode = TextWithBBCodeEnit '  = strBBCode ' This will be adjusted until finally has no BBCode tag pairs
    50   Dim Lstr As Long ' This will be adjusted as necerssary for current length    ' Long is very simple to handle, - final memory "size" type is known (123.456 and 000.001 have same "size" computer memory ) , and so a Address suggestion can be given for the next line when the variable is filled in.  '( Long is a Big whole Number limit (-2,147,483,648 to 2,147,483,647) If you need some sort of validation the value should only be within the range of a Byte/Integer otherwise there's no point using anything but Long.--upon/after 32-bit, Integers (Short) need converted internally anyways, so a Long is actually faster. )
    60    Let Lstr = Len(TextWithBBCodeEnit)                                ' Len(strBBCode)
    70   Rem 2) Loop through and get a BB Code section
    80   Dim strBBCodePair As String ' for a found valid pair  '
    ' Prepares "Pointer" to a "Blue Print" (or Form, Questionaire not yet filled in, a template etc.)"Pigeon Hole" in Memory, sufficient in construction to house a piece of Paper with code text giving the relevant information for the particular Variable Type. VBA is sent to it when it passes it. In a Routine it may be given a particular “Value”, or (“Values” for Objects).  There instructions say then how to do that and handle(store) that(those). At Dim the created Paper is like a Blue Print that has some empty spaces not yet filled in. A String is a a bit tricky. The Blue Print code line Paper in the Pigeon Hole will allow to note the string Length and an Initial start memory Location. This Location well have to change frequently as strings of different length are assigned. Instructiions will tell how to do this. Theoretically a specilal value vbNullString is set to aid in quich checks.. But..http://www.mrexcel.com/forum/excel-questions/361246-vbnullstring-2.html#post44116
    90   Dim posCurrent As Long 'Current position in the string' Loop Bound variable Count '_-Main Loop==========================
    100      For posCurrent = Lstr To 2 Step -1 'Important to go backwards as we chop off behind us so have a less complicated current position. We look at pos-1 in some code parts so we would error if we went back to less than 2
    110      '2a) Check for a ]
    120          If Mid(strRmveBBCode, posCurrent, 1) = "]" Then
    130          Dim posBBCodeTagSrch As Long 'For search through possible valid BBCode Section'_-Loop for Pos tag pair section--
    140          Dim BcrdEEnd As Long: Let BcrdEEnd = posCurrent 'Position of possible End Code Tag End
    150                For posBBCodeTagSrch = posCurrent - 1 To 2 Step -1 'PosCurrent is set here at loop start. ###It is not effected by cardinally sining changing PosCurrent Loop Bound variable caount in Outer main Loop
    160                  If Mid(strRmveBBCode, posBBCodeTagSrch, 1) = "]" Then GoTo NxtCESPosPos ' If we hit another ] then start again to see if is a valid BB code section
    170                  If Mid(strRmveBBCode, posBBCodeTagSrch, 1) = "/" And Mid(strRmveBBCode, posBBCodeTagSrch - 1, 1) = "[" Then 'We hit start of a BB Code end tag
    180                  Dim BcrdESt As Long: Let BcrdESt = posBBCodeTagSrch - 1   'Position of End Code Tag Start
    190                   Exit For ' We leave this For the End Code Tag Start Search, Exit For with a [ at posBBCodeTagSrch-1
    200                  Else 'Not found start of end Tag or stop of end Tag.
    210                  End If
    220 NxtCESPosPos:  Next posBBCodeTagSrch ' go back in possible BB code string
    230          If posBBCodeTagSrch = 3 Then Exit Sub 'case we never found the start of an End Code Tag
    240                For posBBCodeTagSrch = posBBCodeTagSrch - 2 To 2 Step -1 ' Once again ### the start is set and fixed, the Loop Bound Variable Count will change
    250                  If Mid(strRmveBBCode, posBBCodeTagSrch, 1) = "]" Then
    260                  If Mid(strRmveBBCode, posBBCodeTagSrch - 1, 1) = "]" Then GoTo NxtCSSPosPos ' If we hit another ] then start again to see if is a valid BB code start section
    270                  Dim BcrdSEnd As Long: Let BcrdSEnd = posBBCodeTagSrch  'Position of possible Start Code Tag End
    280                  Dim LTagStLoop As Long 'Last loop to find start of start Code Tag
    290                      For LTagStLoop = posBBCodeTagSrch - 1 To 1 Step -1 '_- Second inner loop___________________________
    300                          If Mid(strRmveBBCode, LTagStLoop, 1) = "[" Then
    310                          Dim BcrdSSt As Long 'Have to put it here, - I may occaisionally have to set it to 0 in next line
    320                          If Mid(strRmveBBCode, LTagStLoop + 1, 1) = "/" Then Let BcrdEEnd = BcrdSEnd: Let BcrdSEnd = 0: Let BcrdESt = LTagStLoop: Let BcrdSSt = 0: Let posBBCodeTagSrch = LTagStLoop: GoTo NxtCSSPosPos ' Found a second end Code Tag. So change the previous found start and stop , and adjust the Loop Bound variable Count appropriately for a new search for a start Code Tag
    330                           Let BcrdSSt = LTagStLoop
    340                           Let posCurrent = BcrdSSt 'End of Code Tag section search
    350                           GoTo FkOffCrd ' We leave this For the start Code Tag Start Search and go to Fuk Off Crd:
    360                          Else ' Still looking for start of start Code Tag
    370                          End If
    380                      Next LTagStLoop '_- Second inner loop________________________________________________________________
    390                      If LTagStLoop = 1 Then GoTo TheEnd 'Case we found a start start [ at 1 or failed to find a start start [ for the complete possible Code Tag section search
    400                  Else 'Not found end of start Tag or start of start Tag
    410                  End If
    420 NxtCSSPosPos:  Next posBBCodeTagSrch ' go back in possible BB code string'_-Loop for Pos tag pair section-----------------
    ….If you are my competitor, I will try all I can to beat you. But if I do, I will not belittle you. I will Salute you, because without you, I am nothing.
    If you are my enemy, we will try to kick the fucking shit out of you…..
    Winston Churchill, 1939
    Save your Forum..._
    _...KILL A MODERATOR!!

  9. #9
    Fuhrer, Vierte Reich DocAElstein's Avatar
    Join Date
    Aug 2014
    Posts
    9,429
    Rep Power
    10
    Code part 4 of 4 parts



    Code:
    430 FkOffCrd:  Rem 3) "I think we come here with a complete set of 4 positions"
    440              If BcrdEEnd <> 0 And BcrdESt <> 0 And BcrdSEnd <> 0 And BcrdSSt <> 0 Then 'Just to check'
    450              Dim SttBcrd As String, StpBcrd As String ' Start and stop tags
    460               Let SttBcrd = Mid(strRmveBBCode, BcrdSSt, BcrdSEnd - BcrdSSt + 1): Let StpBcrd = Mid(strRmveBBCode, BcrdESt, BcrdEEnd - BcrdESt + 1)
    470              Dim SttWrd As String, StpWrd As String          ' like |Color=Red|, |/Color|
    480               Let StpWrd = Mid(StpBcrd, 3, Len(StpBcrd) - 3) ' like Color from |/Color| - Whole Word, from 3rd Chr , for Length as  WholeWord-3
    490               Let SttWrd = Mid(SttBcrd, 2, Len(StpWrd))      ' like Color from |Color=Red|
    500                  If UCase(SttWrd) = UCase(StpWrd) And Mid(StpBcrd, 2, 1) = "/" Then 'Ucase allows for differences in cases                                     And Mid(SttBcrd, Len(SttWrd) + 2, 1) = "=" Then
    510                   Let strRmveBBCode = Replace(strRmveBBCode, SttBcrd, "", 1, 1) ' Replace in ( strRmveBBCode , the start tag , with no string , start loooking from and return from character 1 )
    515                   Let strRmveBBCode = Replace(strRmveBBCode, StpBcrd, "", 1, 1)
    520                  Else 'No shortening of string foe invalid tag word
    530                  End If
    540          Else ' no last ] of a possible Code section yet, so keep going back down in the main string
    550          End If
    560      Else
    570      End If
    580      Next posCurrent '_-===Main Loop========================================================================================
    '590 TheEnd:
    600   MsgBox prompt:="" & strRmveBBCode & "": Debug.Print "" & strRmveBBCode & "" 'Hit Ctrl+g when in VB Editor Window,  reveal Immediate window after code run
    Dim RapedText As String: Let RapedText = strRmveBBCode ' TextWithBBCodeEnit with BB Code Code tags removed
    Rem 9) This a Another Object from class to be sure we have the data in the Clipboard
    'Dim objDat As DataObject
     'Set objDat = New DataObject 'Set to a new Instance ( Blue Print ) of dataobject
    Dim objDat As Object
     Set objDat = GetObject("New:{1C3B4210-F441-11CE-B9EA-00AA006B1A69}")
    '9b) Put in (and Get back from clipboard) the raped text.
     objDat.SetText Text:=RapedText 'Make Data object's text equal to original text without the BB Code Code Tags
     objDat.PutInClipboard    'Place current Data object into the Clipboard
     objDat.GetFromClipboard  'All that is in the Clipboard goes in this Data Object second instance of the Class.
    Dim TxtOut As String: Let TxtOut = objDat.GetText() 'retrieve the text in this second instance of the Class. ( In this case all in it is the text and possibly vbCr and vbLf )
    MsgBox prompt:="You dumped in Clipboard this " & vbCr & RapedText & vbCr & "and if you try to get it, you should get" & vbCr & TxtOut & ""
    Rem 10a) Code Part 3) Belt and braces check. A check is then done finally to see if the two raped from tags strings are the same
        If NewWordText <> RapedText Then MsgBox prompt:="Text from Word Dialogue Box Find Replace Wild card way, and " & vbCrLf & "Long String manipulation way are not the same. Oh dear"
    '10b) Tidy up.
    TheEnd:  ' ( Come here always, even on a unpredictable error ) or i wouod If i had an error Handler, Lol.
     Set objDat = Nothing '   Good practice...   maybe....
     Set objCliTextCopied = Nothing '  .......   http://www.mrexcel.com/forum/excel-questions/361246-vbnullstring.html#post4414065
    
    End Sub
    ….If you are my competitor, I will try all I can to beat you. But if I do, I will not belittle you. I will Salute you, because without you, I am nothing.
    If you are my enemy, we will try to kick the fucking shit out of you…..
    Winston Churchill, 1939
    Save your Forum..._
    _...KILL A MODERATOR!!

  10. #10
    Fuhrer, Vierte Reich DocAElstein's Avatar
    Join Date
    Aug 2014
    Posts
    9,429
    Rep Power
    10

    Recursion Wonk. To remove BB Code tag pairs incuding nested ones missus

    One problem noted in the previous codes was that the case of nested BB Code tag pairs, the codes did not work. At many forums such nesting of this form is permitted in BB codes.
    [color=Green]Comments [color=Red]Highlight[/color] Comments[/color]
    The returned result is
    Comments Highlight Comments

    None of the codes discussed so far will work for such a case.
    Should the Code tag type be dissimilar, such as_..
    [CENTER][B]Title[/B][/CENTER]
    _..then at least the Find Replace Wildcard Code will work for that by virtue of matching in the String first, for example, in the above example, _..
    __ CENTER __ __ __ __ CENTER __
    _.. then
    __ B __ __ __ __ B __
    However my Long string manipulation code will not even work for that.

    I have done a Long string manipulation code to be discussed in this and the following posts which , I think, work for all situations.

    Brief Descriptions is:
    The entire string is held in a variable, strBBCode. This is declared in a Subroutine. Something similar to that was done for the last code )

    change 1) Minor to last code:
    Unlike the previous codes, ( which sequentially removed BB Code code tags ( by replacing with "" )), the code tags are replaced by some arbitrary character ( This is simply chosen as any not likely to be used as text in the main initial string https://www.mrexcel.com/forum/excel-...ml#post4214083 )

    change 2) Minor
    This itself is not such a major change in the code format, but it facilitates the main change, 3) below. This change is that bulk of the code is within a Function, (Function LongWayOfDoingIt2ReCurseCyClops(__ ) . It is “Called” and needs to be given_..
    _.. the string, strBBCode, By Referral to that variable, rather than its By its Value contents
    and_..
    _.. a Value for the current character position, which initially will be the end ( or length in characters ) position of strBBCode.

    But those are not the main changed characteristic to the code.
    To recap: All my long string manipulation codes, including this Function, have the general characteristic that they loop backwards in the complete string until a ] is found. An attempt is made then to find a [/ . Once this is found an attempt is made to find a ] and then a [ .
    At this point a possible code pair requirement , looking backwards, of ] [/ ] [ is achieved
    ( Reversing that to the correct order shows that clearly more clearly,
    [ _ ] __ [/ _ ],
    or
    [codeText] AnyText [/CodeText] .
    Or
    [Color=red] AnyText [/color]
    _.. etc...)
    Having found a code tag pair, a check is made for its validity ( the same matching work, such as, codetext, color, for example ) , before the adjustments are made to the main string. After that , the code then moves on and steps further “back” in search of another pair_..
    _.. But just before it does that check, all codes, including this new Function, at the last found [ , do a check to see if in fact the next character after the last found [ is a / , indicating that in fact the assumed start tag, [codeText], was in fact another end tag, [/Codetext_b]. Action is then taken should that be the case.
    At this point the codes are very different. The action taken is different
    In the previous code, it was assumed that in such an event, the first found “end tag” was a rouge text looking like an end tag , but invalid, and not matched to a start code tag. The first found “end tag” was then ignored, and another search made for a matching start tag to the second found end tag.
    This results in an error situation for a valid nested BB Code tags situations.
    The new code works therefore much differently.

    Main change 3):
    In the new code, this point is around lines
    430 – 460, Rem If [/ Then Oh dear time for a wonk.
    Recursion is the name given for the general technique which at this point is used. It is whereby within a routine an instruction is given to run the routine.
    ... In other words the Routine “Calls itself”.
    So what is all that about? :
    ‘_- I will tell you, Matey boy:
    Any Function or Sub routine we write, is just a set of instructions. Like a piece of paper which is a Print out of the typed code instructions. It tells VBA what to do when it is run or called. I does not really physically go along or through the code lines: We just find that easy to visualise, or “look at “ when “stepping” through to debug a code. The code is just a set of instructions that VBA understands.
    So imagine you are VBA and you are given a set of instructions ( on a piece of paper ) to do a job, (for example you are given a written copy of the instructions to read and follow).
    You start doing the instructions.
    Now, say, before you are finished, you are given a set of identical instructions and are told to do that by the boss. What do you do, ( apart from swear at him ) ?
    The logical progression is, ( and that is what VBA does ), it stops what it is doing, so like freezes the initial running through the instructions , and starts again with the new ( duplicate as it happens in the case of “recursion”) set of instructions.
    Once finished it goes back and picks up the first job where you / it left off. Within reason, there is no limit to how often you can do that in VBA. If a code makes a Function or Sub routine keep “Calling” itself , then it “stacks” up in order in a “waiting list” the stopped set of instructions. As each set of instructions is completed, the last are continued at the point where they were interrupted and “frozen”. That point is code line 450
    It follows, ( although may not be immediate obvious as the same names are used) that all variables used in each run of the Function within the function are unique to that run of the function so do not influence the values of the similarly named variables in the other Function runs. An exception here is our main full string, strBBCode. This is because we have deliberately chosen to carry it over By such a way as to indicate it should be Referenced to within each Function. So in this case, changes made in any Function run to strBBCode will be Reflected in the main ( unique ) variable, strBBCode, which is initially “held” / declared in the initial calling code.
    So what is all that to do with the main change to this code version ??
    ‘_- I will tell you, Matey boy:
    Initially the Function is called the first time by a small Sub routine which passes to the Function two things
    _(i) the variable strBBCode. It is indicated via the use of ByRef in the Function signature ( first ) line, that specifically that variable is to be Referenced. ( You may effectively take a variable “into” the Function ( ByRef ) , or alternatively a Value. If an actual value is given, then giving it ByRef is just the same as By Value. If you pass a Variable ByValue the value at the time of the Call in the variable will be taken, and that variable will become local to the Function and so any changes to it made in the function will not be reflected in the variable “held” in the initial calling routine ........ )
    _...(ii) a number .......Value... is given which will be the start position to work back from when looping backwards through the characters in strBBCode. For this first Call, that will be the length of / or character count of , strBBCode.

    The Function code then transgresses as described and very similar to the previous code. It can go to completion in one run should no end code tag be encountered after an initial one is found and before a start tag is found.
    ____If a second end tag in sequence is found the "recursion wonk" kicks in.....
    450 _____ Call LongWayOfDoingIt2ReCurseCyClops(strBBCode, BcrdSEnd)
    So _ If this line is done, the current run freezes. A New Function begins. This is instructed to Refer to the unique main string strBBCode “held” in the original Calling routine. As Value for the current position in the backward stepping search is this time not the main string strBBCode length, but rather the position of the end ] in the currently found second sequential end code tag.
    The only thing that is certain at this point is that the new Function run will immediately find this second end cote tag as its first end code tag. This is probably inefficient as it repeats some steps done. ( A more complicated Function could be envisaged to carry across an Offset to be applied to “jump” this search and pass the end code tag )
    With no more nested code tag pairs, the second Function will complete the entire string, other than the possible code tag pair search “frozen” in the first Function.
    When the first function resumes, the initial code tag pair search is completed.

    There are many other scenarios including a further nested code tags section the second function finds and results in a third Function starting. That third Function would complete all but the two pairs searches “frozen” . At completion of the third Function, the second and then the first Functions with their respective code tag pair search would be completed.

    Another scenario would be a double nesting such that there are three sequential end code tags. Once again a second followed by a third Function would be started. Once again, the third Function would complete all but the two pairs searches “frozen”. At completion of the third Function, the second and then the first Functions with their respective code tag pair search would be completed.

    One can imaging many more scenarios

    One common factor is that all but the final function will be searching through the replaced replacement characters. This probably makes the code a bit inefficient

    Final usage of Function
    Initial code to Call the Function for the first time. ( The function may Call itself one or more times further )
    The Function will not run itself.
    It needs to be Called with the initial parameters passed, the main string, strBBCode, along initially with the length of that string as the start point from which to step back.
    A routine is needed for that.
    Additionally, once the initial Function run , ( which is set off by this routine ) is finished, we will have the original string, strBBCode , returned in a modified form with the replacement character in place of all found code tags. These need to be removed, which can be easily achieved by replacing them with zero length strings.
    An example code is given in the next post.

    A few minor last thoughts..
    This second solution for manipulating a long string text does not require stepping backwards. It was simply developed on from the last code. That code was easier to do backwards as in the code parts were deleted whilst stepping through the string: It was easier to deal with such a code in a backward loop, as things “behind me” are deleted. The problem with going forward is that “deleting in front of me” can require adjusting “where I am”, and the count to, or “final point of where I am going to”. – Think of it as you tripping up, or effecting where the end is, if you chop out the path in front of you: VBA can get messed up in Looping if you remove points in a progression that have not yet been considered.
    Another way of thinking about that:
    If I take bits out, then things shift back or down to fill the space. If I take things out in front of me, then by shifting back, things which I have not yet considered will change their position. This will likely mess up some order of progression.
    If I go backwards, and delete things behind me, then any order changes will only affect things which I have already considered. My original progression plan and order of things not yet considered is still valid.
    Last edited by DocAElstein; 02-27-2017 at 09:44 PM.
    ….If you are my competitor, I will try all I can to beat you. But if I do, I will not belittle you. I will Salute you, because without you, I am nothing.
    If you are my enemy, we will try to kick the fucking shit out of you…..
    Winston Churchill, 1939
    Save your Forum..._
    _...KILL A MODERATOR!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •