Formula Following Order Of Calculation BODMAS

Here is how i calculated

Volume of discharges - 30 litres
There is 3.6 litres of water added to the 30 litres
Then
100ml sample taken from the discharges (30+3.6) and then spun in a centrifuge = 60% solids in tube is the result

Now if i remove the 3.6 litres of water i should get 67% solids...i used this below

Calculated = 60*(30+3.5)/30

I need to know if this is the correct answer and then how to set up in a spreadsheet please

Thanks for any help

Paul

Hi,
Using your formula in excel

=60*(30+3.5)/30
Gives the answer of 67.2.
To put this into excel

Code:

---

=60*(30+3.5)/30

---

copy and paste this.

Thanks Stalker

Using the figures in my 1st post have i calculated the correct answer as well

Thanks

Hi
Please have i calculated the correct result
Thank you
Paul

Hello, your first post has conflicting information, first you say

Quote:

---

There is 3.6 litres of water added to the 30 litres

---

then your calculation states

Quote:

---

Calculated = 60*(30+3.5)/30

---

Which i did not pick up on at first, i do apologise.

If your data is 3.5 then the result is 67.0
If your data is 3.6 then the result is 67.2

Does that help?

Thanks Stalker

Yes that all makes sense

I am just now enquiring if 60% is solid material and i remove the water that the solids now should be 67.2%...i now understand the calculation in Excel but am enquiring if the actual result is the correct answer.....with all the figures used above i need to know if removing the water from the sample will now be 67.2% solids instead of 60% with water

Thanks again

Hi Paul_P,
The mathematics behind it are sound.

= 60*(30+3.5)/30
Excel will do the following calculations:
30+3.5 = 33.5
60*33.5 = 2010
2010/30 = 67

-or-
30+3.6= 33.6
60*33.6= 2016
2016/30 = 67.2

The equation in brackets will be handled first by excel.

Hi Stalker

Thanks for your help

Appreciated

Paul